Model

Features

Picture

  
   
 

EL-2200

  

 

  
 

  • Large memory : stores up to 12,800 user cards and transactions

  • Stand-alone or network operation via PC
  • Modem Support : May be programmed to initiate dial up sequence to a remote PC
  • 22 types of events are distinguished, and can be logged selectively
  • 6 open collector outputs can be toggled or pulsed by timer or any of the 22 events
  • PIN only, Card only, and Card Plus PIN Operation Modes
  • Lock-out of a card when its PIN is wrongly entered repeatedly
  • Setting of phone number and dialing commands for direct linking to modem
     

 
   
   EL-1300  

 

  
 
  • Uses the latest microcontroller, with firmware stored in Flash Memory
  • Equipped with a real time clock backed up by a lithium battery
  • A wide range of formats are catered for, such as ABA format, 26 bit Wiegand format, and free Wiegand format, where users can specify selected fields such as Card ID number and facility code
  • Provides 10 time zones (categories), each with 8-day schedule (7 weekdays + holiday), with 2 start-stop periods assigned to each day. Up to 20 holidays can be programmed beforehand. Automatic Time Zones are provided for unlocking doors or selecting Card+PIN mode at specific periods.
  • Alarm monitoring functions become available when EL1300 is operated from EsonWIN32 PC software. Each EL1300 is equipped with 3 supervised inputs and 1 relay output. Since the maximum system size for EsonWIN32 is 64 doors, such a system will have 192 input points and 64 output points for alarm monitoring usage
  • Can be connected to a keypad unit (EK9S or EK6S) which provides 12 numeric keys, and 4 digits of 7-segment display.
  • The input power requirement is 15VAC, and a lead-acid battery can be connected to the charger output
              
 

EL-350

  

 

  
 
  • Equipped with a calendar clock chip to give accurate date and time. The built-in Lithium battery continues to power the clock for years even when there is no external power
  • Caters for timers and time zones, limiting access and users to different times of the day.
  • Up to 1,000 user ID can be stored in EL350, and the most recent 200 transactions are logged. The information is stored in non-volatile memory, ensuring that the database stays intact even when power is removed
  • Equipped with 7-segment display. The display gives clear status indication of controller condition during operation. For example, when a card is denied entry, the display shows the reason for the denial. E-IC means Invalid Card, E-t means Time Zone violation, E-rd means Wrong Card Format etc
  • Can work with any reader with Wiegand compatible output.
  • A major user concern for stand alone controller is that once a person forces open the controller cover, he can open the door that the controller is protecting. For EL350, the inputs and outputs are located on a separate module the EZ5. This module, which is only slightly larger than a cigarette box is mounted in a secure area, and electric door lock currents are supplied by this module and not by the EL350 Controller
  • Access Management Software is available, which runs on standard PC. This software allows users to program EL350 as well as to retrieve information from EL350. Database of multiple units of EL350 can be managed through this software, and comprehensive reports can be generated. A similar software is available for running on Palm Size PC. Communication with PC or PDA is through the built-in RS232 port
     

 
 

EL-3000

  

 

  
 

  • Fabricated on a silicon chip, this Fingerflex feature reduced power consumption compared to optic-based sensors, with high durability for long-term application.

  • A 32-bit processor based on RISC architecture executes the recognition algorithm. Achieved verification time is no more than 1.0 seconds. Recognition accuracy is less than 0.5% for false rejection rate and less than 0.01% for false acceptance rate.

  • Fingerflex comes with three models:
     EL3000E -EM Compatible proximity card reader
     EL3000H -HID proximity card reader
     EL3000M MIFARE contactless smart card reader

  • EL3000M eliminates fingerprint template storage on controller, where 2-dimensional complete fingerprint image and personal information are stored in the Mifare smart cards.

  • Data Storage Capacity
     Number of Master Users to administer device: 10 Number of Fingers for enrollment: 2
    Model Fingerprint Template Storage Number of users No of transactions
    EL3000E Controller 2,000 or 4,000 12,000
    EL3000H Controller 2,000 or 4,000 12,000
    EL3000M Controller 2,000 or 4,000 12,000
    EL3000M Card 10,000 12,000

  • Recognition accuracy can be determined by selectable verification levels to Fingerprint enrollment and by selectable matching threshold.

  • Settings for Date /Time, Holidays, Timers (24 sets) and Time Zones (10 sets)

  • Controls to door such as lock release duration for each access, sensor and alarm output controls, application of push button or out reader, access inhibition, pulse lock release, and the application of anti-pass back

  • Communication facilities include encryption for transmitting finger print template, and access transaction data, unit number settings, baud rate and connectivity tests